RF:RF In LO Export Enabled Property

NI RF Signal Generators Help (NI-RFSG 18.1)


Edition Date: June 2018
Part Number: 371025V-01
View Product Info

Download Help (Windows Only)


NI-RFSG 18.1 Help
NI-RFSG 18.2.1 Help
NI-RFSG 19.1 Help

Short Name: RF In LO Export Enabled

Property of niRFSG

Specifies whether to enable the RF IN LO OUT terminal on the PXIe-5840.

Set this property to Enabled to export the LO signal from the RF IN LO OUT terminal.

This property cannot be enabled or disabled unless an NI-RFSA session on the PXIe-5840 has set the NI-RFSA LO Out Export Configure From RFSG property to Enabled.

Supported Devices: PXIe-5840

Default Value: Unspecified

Unspecified (-2)

The RF In local oscillator signal may or may not be present at the front panel LO OUT connector, because NI-RFSA may be controlling it.

Disabled (0)

The RF In local oscillator signal is not present at the front panel LO OUT connector.

Enabled (1)

The RF In local oscillator signal is present at the front panel LO OUT connector.

Remarks

The following table lists the characteristics of this property.

Datatype iL
PermissionsRead/Write
High-level VIs N/A
Channel-based No
ResettableYes

WAS THIS ARTICLE HELPFUL?

Not Helpful