Obsolete:Upconverter Center Frequency Increment Anchor (Hz) Property

NI RF Signal Generators Help (NI-RFSG 18.1)


Edition Date: June 2018
Part Number: 371025V-01
View Product Info

Download Help (Windows Only)


NI-RFSG 18.1 Help
NI-RFSG 18.2.1 Help
NI-RFSG 19.1 Help

Short Name: Upconverter Frequency Increment Anchor (Hz)

Property of niRFSG

Note  This property is obsolete and should not be used.

Specifies the reference point for the upconverter center frequencies to use. This property can increase the speed of frequency sweeps by reducing the number of times the upconverter retunes.

If explicitly set, the upconverter center frequency (UCF) is selected according to the following formula:

UCF = UCF anchor + (UCF increment * k)

where k is any positive or negative integer.

Supported Devices: PXIe-5672

Remarks

The following table lists the characteristics of this property.

Datatype fD
PermissionsRead/Write
High-level VIs N/A
Channel-based No
ResettableYes

WAS THIS ARTICLE HELPFUL?

Not Helpful