You are here: NI Home > Support > Product Reference > Manuals > LabVIEW DSP Module 2.5 Help

Generates speed and direction information to control a motor device using the speed and channel you specify.

Note  You must have the SPEEDY-33 Robot Daughter Module to use this VI.

Details  

	channel indicates the radio controller (R/C) channel. Available channel selections are CH1, CH2, CH3, and CH4. The default is CH1.
	speed represents the motor speed for channel. A value of -1 indicates full speed in the reverse direction. A value of 0 indicates neutral. A value of 1 indicates full speed in the forward direction.

Motor Drive Control Details

You can control up to four motors at one time using multiple instances of this VI. Each VI controls only one motor. This VI provides for autonomous capability by removing the need for a radio controller unit to provide speed and direction.