You are here: NI Home > Support > Product Reference > Manuals > LabVIEW 8.2 Help

Right-click a LabVIEW project library or folder within a library and select New»Variable from the shortcut menu, or right-click an existing shared variable and select Properties from the shortcut menu to display this dialog box.

Use this dialog box to configure a new shared variable or edit the configuration of an existing shared variable.

Use the selections in the left pane of this dialog box to access shared variable configuration options:

• Variable—Determines the basic configuration of the shared variable, including the Data Type and Variable Type.
• Real-Time FIFO—Enables and configures the Real-Time FIFO of a shared variable.
• Logging—Configures logging options for the shared variable.
• Update Deadband—Configures the deadband options for the shared variable.
• Alarming—Configures alarming options for the shared variable.
• Scaling—Configures scaling options for the shared variable.
• Initial Value—Configures the initial value for the shared variable.
• Description—Specifies a description for the shared variable.
• Security—Configures the security options for the shared variable.

LabVIEW modules and toolkits you have installed might provide additional shared variable types, configuration options, and limitations. Refer to the documentation for the LabVIEW module or toolkit for more information about the shared variable types, configuration options, and limitations that product adds to shared variables.

Note  If you are using a network-published Shared Variable node that is configured to read data, you must run each Shared Variable node before the node subscribes and starts receiving buffered values.