You are here: NI Home > Support > Product Reference > Manuals > LabVIEW 8.2 Help

Method of Library.

Saves the LabVIEW project library file. You also can right-click the project library in the Project Explorer window and select Save As from the shortcut menu to save the project library file.

Note  The LabVIEW Datalogging and Supervisory Control Module supports this method in the Run-Time Engine.

Parameters

Name	Description
Path	Path to the LabVIEW project library file. LabVIEW ignores this parameter if you set Target to Clipboard. When you set Target to File, you must specify a Path.

Remarks

The following table lists the characteristics of this method.

Settable when the VI is running	No
Need to authenticate before use	No
Loads the block diagram into memory	No
Remote access disallowed	No
Loads the front panel into memory	No
Must wait until user interface is idle	Yes
Available with control VIs	No
Available with global VIs	No
Available with strict type definitions	No
Available with polymorphic VIs	No
Available in Run-Time Engine and Real-Time Operating System	No