You are here: NI Home > Support > Product Reference > Manuals > LabVIEW 8.5 Help

To create a dynamic dispatch member VI, you must set one input terminal on the connector pane to Dynamic Dispatch Input (Required). Complete the following steps to set a connector pane input terminal to Dynamic Dispatch Input (Required).

1. Right-click the VI icon and select Show Connector.
2. Assign a front panel control or indicator to each of the connector pane terminals you want to assign, if they are not already.
3. Right-click the input terminal on the connector pane that you want to set as a dynamic dispatch input and select This Connection Is»Dynamic Dispatch Input (Required) from the shortcut menu.

Note  You can set a terminal to Dynamic Dispatch Input (Required) only if the terminal is of the same class type as the class that owns the member VI.

4. Right-click the connector pane and select Show Icon to return to the VI icon.

You can create dynamic dispatch output terminals by right-clicking an output from the connector pane and selecting This Connection Is»Dynamic Dispatch Output (Recommended) from the shortcut menu.

Note  Although a dynamic dispatch member VI can have no more than one dynamic input, the VI can include multiple dynamic outputs.