You are here: NI Home > Support > Product Reference > Manuals > LabVIEW 8.5 Help

Builds a digital waveform or modifies an existing waveform. If you do not wire the waveform input, the VI creates a new waveform based on the components you wire. If you wire the waveform input, the VI modifies the waveform based on the components you wire.

Examples

	waveform is the digital waveform you want to edit. If you do not wire an existing waveform, the VI creates a new waveform based on the components you wire. t0 is the start time of the waveform. dt is the time interval in seconds between data points in the waveform. Y is a digital table that contains the data values of a waveform.
	t0 is the start time of the waveform.
	dt is the time interval in seconds between data points in the waveform.
	Y is a digital table that contains the data values of a waveform.
	attributes sets the names and values of all waveform attributes. You also can use the Set Waveform Attribute VI to set the name and value of a single attribute.
	waveform is the resulting waveform. If you did not wire an existing waveform, this is a new waveform. If you wired an existing waveform, this is the edited waveform.

Examples

Refer to the following VIs for examples of using the Build Waveform (Digital Waveform) VI:

• Add Waveforms example VI: labview\examples\Waveform\Operations.llb
• Create Waveform example VI: labview\examples\Waveform\Operations.llb