Doc Max Property
Short Name: DocMax
Requires: Base Package
Class: Scrollbar Properties
To Use: Create a property.
Maximum value of the scrolling range.
You can set the maximum value of the scrolling range to be less than the minimum value if you want the scrolling range to scroll from Doc Max to Doc Min. If you do not coerce Doc Max, you can increment the scroll bar value out of the scrolling range by clicking the increment arrow. The top or left position of the scroll box determines the value of the scroll bar. If Doc Min is 0, Doc Max is 10, and Page Size is 2, the scrolling range is 0 to 8.
This property is similar to the Maximum option on the Data Entry page of the Scrollbar Properties dialog box.
Remarks
The following table lists the characteristics of this property.
| Data type |  |
| Permissions | Read/Write |
| Available in Run-Time Engine | Yes |
| Available in Real-Time Operating System | Yes |
| Settable when the VI is running | Yes |
| Loads the front panel into memory | No |
| Need to authenticate before use | No |
| Loads the block diagram into memory | No |
| Remote access allowed | Yes |
| Must wait until user interface is idle | No |
| Available with control VIs | No |
| Available with global VIs | No |
| Available with strict type definitions | No |
| Available with polymorphic VIs | No |
Example
Refer to the Cluster with Scrollbar VI in the labview\examples\general\controls directory for an example of using the Doc Max property.