Company Events Academic Community Support Solutions Products & Services Contact NI MyNI

Get Image Method

LabVIEW 2013 Help

Edition Date: June 2013

Part Number: 371361K-01

»View Product Info

Short Name: Get Image

Requires: VI Scripting

Class: Node Methods

To Use: Create a method.

Returns an image of a block diagram node.

Parameters

Data typeNameRequiredDescription
Image DepthNoSets the color depth, or number of supported colors, of the image: 1 (1-bit, black and white), 4 (4-bit, 16 colors), 8 (8-bit, 256 colors), or 24 (24-bit, true color). The default is 8.
Background ColorNoSpecifies the background color of the image.
Image DataYesInformation about the image so you can use the Draw Flattened Pixmap VI to draw it as a picture or use the Graphics Formats VIs to save the image to a file. This cluster is similar to the image data output of the Read JPEG File, Read PNG File, and Read BMP File VIs.
  • image type—Reserved for future use.
  • image depth—Specifies the color depth of the image, which is the number of bits to use to describe the color of each pixel in the image. Valid values include 1, 4, 8, and 24 bits per pixel. image depth affects how LabVIEW interprets the values of image and colors.
  • image—Array of bytes that describes the color of each pixel in the image in raster order. The value of image depth determines how LabVIEW interprets the value of this output. If image depth is 24, each pixel has three bytes to describe its color. The first byte for each pixel describes the red value, the second byte describes the green value, and the third byte describes the blue value.

    If image depth is 8, each pixel has one byte to describe its color. The value of each bit corresponds to an element in colors, which stores 32-bit RGB values where the most-significant byte is zero, followed in order by red, green, and blue values.

    If image depth is 4, the behavior is similar to when image depth is 8 except valid values in image include 0 through 15.

    If image depth is 1, any value of zero in image corresponds to element 0 in colors. All other values correspond to element 1 in colors.

    The size of the array might be larger than expected due to padding.
  • mask—Array of bytes in which each bit describes mask information for a pixel. The first byte describes the first eight pixels, the second byte describes the next eight pixels, and so on. If a bit is zero, LabVIEW draws the corresponding pixel as transparent. If the array is empty, LabVIEW draws all pixels without transparency. If the array does not contain a bit for each pixel in the image, LabVIEW draws any pixels missing from the array without transparency.
  • colors—Array of RGB color values that correspond to the values in image. The value of image depth determines how LabVIEW interprets the value of this output. If image depth is 24, LabVIEW ignores this output. If image depth is 8, the array has 256 elements. If image depth is 4, the array has 16 elements. If image depth is 1, the array has 2 elements.
  • Rectangle—Cluster that contains coordinates that describe the bounding rectangle of the image, where the upper-left corner is at (0,0). The bottom right edges of the bounds does not include the image.

Remarks

The following table lists the characteristics of this method.

Data typeNo return value
Available in Run-Time EngineNo
Available in Real-Time Operating SystemYes
Settable when the VI is runningYes
Loads the front panel into memoryYes
Need to authenticate before useNo
Loads the block diagram into memoryYes
Remote access allowedYes
Must wait until user interface is idleNo
Available with control VIsNo
Available with global VIsNo
Available with strict type definitionsNo
Available with polymorphic VIsNo

 

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
Add Comments 1 2 3 4 5 submit