From 09:00 PM Friday, August 7 - 10:30 AM CST Saturday, August 8, ni.com will be undergoing system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Alarming:LoLo:Level Property

LabVIEW 2018 Help


Edition Date: March 2018
Part Number: 371361R-01
View Product Info

DOWNLOAD (Windows Only)


LabVIEW 2016 Help
LabVIEW 2017 Help
LabVIEW 2018 Help
LabVIEW 2019 Help
LabVIEW 2020 Help

Short Name: Alarming.LoLo.Level

Requires: Base Development System

Class: Variable Properties

To Use: Create a property.

Gets or sets the value, in engineering units, that evokes the LO_LO alarm condition for a shared variable. To use this property, you must install the LabVIEW Datalogging and Supervisory Control Module.

The shared variable remains in the alarm state until the shared variable value exceeds this value plus the deadband value.

Note  You can enable alarming only for network-published shared variables.

This property is similar to the Level/Change option on the Alarming page of the Shared Variable Properties dialog box.

Remarks

The following table lists the characteristics of this property.

Data type
PermissionsRead/Write
Available in Run-Time EngineNo
Available in Real-Time Operating SystemNo
Settable when the VI is runningYes
Loads the front panel into memoryNo
Need to authenticate before useNo
Loads the block diagram into memoryNo
Remote access allowedYes

WAS THIS ARTICLE HELPFUL?

Not Helpful