Serial Settings:End Mode for Writes

LabVIEW 2018 Help


Edition Date: March 2018
Part Number: 371361R-01
View Product Info

DOWNLOAD (Windows Only)


LabVIEW 2016 Help
LabVIEW 2017 Help
LabVIEW 2018 Help
LabVIEW 2019 Help
LabVIEW 2020 Help

Short name: ASRL End Out

Requires: Base Development System

Classes: Instr, Serial Instr

Specifies the method used to terminate write operations. Valid values include: (0) None, (1) Last Bit, (2) TermChar, (3) Break. The default is (0) None.

Descriptions

(0) None—The write will transmit the exact contents of the user buffer, without modifying it and without appending anything to the data.

(1) Last Bit—The write will send all but the last character with the highest bit clear and then transmit the last character with the highest bit set.

(2) TermChar—The write will send the character specified as Termination Character after the data transmits.

(3) Break—The write will transmit a break after all the characters for the write have sent.

Values

0 None
1 Last Bit
2 TermChar
3 Break

Remarks

The following table lists the characteristics of this property.

Data type
Permissions Read/Write

WAS THIS ARTICLE HELPFUL?

Not Helpful