FPGA I/O Node Properties Dialog Box (FPGA Module)

LabVIEW FPGA Module 8.2 Help
August 2006

NI Part Number:
371599B-01

»View Product Info

Right-click an FPGA I/O Node on the block diagram and select Properties from the shortcut menu to display this dialog box.

Use this dialog box to configure the FPGA I/O Node. The options that appear in this dialog box vary by the FPGA target and FPGA I/O you use.

Note The options you configure in the FPGA I/O Node only apply to the FPGA I/O item in the FPGA Node and not throughout the LabVIEW project. The configuration options you specify in the Project Explorer window apply to the FPGA I/O item on the FPGA target.

This dialog box might include the Advanced Code Generation page in the Category list.

Resources

Importing HDL Code into FPGA VIs Using the HDL Interface Node - NI Developer Zone
Developing Custom Measurement and Control I/O Hardware with the LabVIEW 8 FPGA Module and - NI Developer Zone
Using the LabVIEW Project to Create LabVIEW FPGA Resources - NI Developer Zone