You are here: NI Home > Support > Product Reference > Manuals > LabVIEW FPGA Module 8.2 Help

You can configure the FPGA I/O item in the Project Explorer window or in the FPGA I/O Node on the block diagram. The configuration options you specify in the Project Explorer window apply to the FPGA I/O item on the FPGA target. The options you configure in the FPGA I/O Node only apply to the FPGA I/O item in the FPGA Node and not throughout the FPGA target.

Configuring FPGA I/O Items in the Project Explorer Window

Complete the following steps to configure FPGA I/O items in the Project Explorer window.

1. Right-click the FPGA I/O item in the Project Explorer window and select Properties from the shortcut menu to display the FPGA I/O Properties dialog box.
2. Select General from the Category list to assign a name to the FPGA I/O item.
3. Configure other options that appear under the Category list.

   Note  FPGA I/O configuration options vary according to I/O resources and the FPGA target. Some FPGA I/O items cannot be configured. Other FPGA I/O items have several configuration options. Select an option from the Category list and click the Help button, to learn about a configuration option available for the FPGA I/O item.

Configuring FPGA I/O Items in the FPGA I/O Node

Complete the following steps to configure FPGA I/O items in the FPGA I/O Node.

1. Right-click the FPGA I/O Node and select Properties from the shortcut menu to display the FPGA I/O Node Properties dialog box.
2. Configure options that appear under FPGA I/O item in the Category list.

   Note  FPGA I/O configuration options vary according to I/O resources and the FPGA target. Some FPGA I/O items cannot be configured. Other FPGA I/O items have several configuration options. Select an option from the Category list and click the Help button, to learn about a configuration option available for the FPGA I/O item.