You are here: NI Home > Support > Product Reference > Manuals > LabVIEW 8.6 FPGA Module Help

Owning Palette: Nonlinear Systems VIs

Installed With: FPGA Module

Switches between two input values based on the value of control input. The data type you wire to input 1 or input 2 determines the output data type.

The maximum input word length is 32 bits.

	input 1 is the result if control input is greater than threshold.
	control input allows you to select between input 1 and input 2.
	input 2 is the result if control input is less than or equal to threshold.
	threshold is the setpoint to which LabVIEW compares control input.
	output is the switched result. output = input 1 for control input > threshold output = input 2 for control input <= threshold