Configuring FPGA Targets (FPGA Module)
You can configure FPGA targets from the Project Explorer window. FPGA target functionality varies depending on the specific target. Refer to the specific FPGA target hardware documentation for information about configuration options available for the target.
- Create a new project or open an existing project.
- Add an FPGA target to the project.
- Right-click the FPGA target in the Project Explorer window and select Properties from the shortcut menu. The FPGA Target Properties dialog box appears.
- Select General from the Category list.
- Enter a Name for the FPGA target. The Name identifies the FPGA target in the Project Explorer window.
- If you did not select an existing target when you added the FPGA target to the project, enter a Resource for the FPGA target. The Resource associates the FPGA target in the Project Explorer window with a specific FPGA target connected to the development computer, network computer, or RT target.
Note The Resource name can be found in NI Measurement & Automation Explorer (MAX). For FPGA targets that appear in MAX as NI-DAQmx Devices, the Resource is the name of the device that you specify in MAX. - (Optional) Specify if you want to run the FPGA on a development computer to test the FPGA VI.
- Click the OK button.
|
Note You also can configure other properties of the FPGA target in the FPGA Target Properties dialog box, such as the top-level clock and the conditional disable symbols. |