|LabVIEW 2015 FPGA Module Help|
|LabVIEW 2016 FPGA Module Help|
|LabVIEW 2017 FPGA Module Help|
|LabVIEW 2018 FPGA Module Help|
|LabVIEW 2019 FPGA Module Help|
Complete the following steps to write to a DMA FIFO from a host VI.
|Note The FPGA target, FPGA VI, and host VI must be in the same LabVIEW project if you want to open a reference to an FPGA VI. The host VI does not need to be in a project if you open a reference to a bitfile. If you open a reference to an FPGA VI, the project must include a DMA FIFO item under the FPGA target and the FPGA VI must include a FIFO Method Node configured with the Read method on the block diagram that reads the DMA FIFO item.|
|Note You can write DMA FIFOs using only the Invoke Method function with the Write method. If you want more control over the DMA FIFO from the host VI, you also can configure, start, and stop the DMA FIFO using the optional Configure, Start, and Stop methods with the Invoke Method function.|