Company Events Academic Community Support Solutions Products & Services Contact NI MyNI

Interacting with Data by Using I/O Servers (DSC Module)

LabVIEW 2013 Datalogging and Supervisory Control Module Help

Edition Date: June 2013

Part Number: 371618J-01

»View Product Info
Download Help (Windows Only)

An I/O server is an application that communicates with and manages input/output devices such as programmable logic controllers (PLCs), remote input/output devices, remote Shared Variable Engines (SVE), and data acquisition (DAQ) plug-in devices. These I/O servers read selected input items and write to the selected input items on demand.

I/O servers plug into the SVE to provide a list of items available for subscription and to source that data to the SVE. With the LabVIEW Datalogging and Supervisory Control (DSC) Module, you can write LabVIEW I/O servers for any client. Typically, I/O servers expose certain configurable properties that you can configure when you add the I/O server to the LabVIEW project. For example, you might be able to configure the following options:

  • Poll rate—How often do I query the hardware?
  • Poll items—What do I query on the hardware?
  • Published items—What values should I report?

I/O servers report error conditions reported by the hardware on abnormal conditions. The I/O server starts running when you deploy the LabVIEW project library that defines the server and stops when you stop or undeploy the project library. If you create the I/O server programmatically, the I/O server starts running when the VI that contains it executes the Create and Configure I/O Server Express VI. The I/O server then stops running when the VI that contains it executes the Delete I/O Server VI.

A server item is a channel, input/output point, or variable in a hardware device. Connect DSC Module applications to these server items with network-published shared variables. Device servers monitor the values acquired by the hardware. The SVE updates the shared variables when the server sends new data to the SVE. Servers also update each output when the Human Machine Interface (HMI) application writes that shared variable value, and they handle and report communications and device errors. A good device server covers all device- and hardware-specific details, establishing a device-independent input/output layer for the DSC Module. Many device servers include a configuration utility as well as the run-time application that communicates with the SVE.

The DSC Module can connect to any OPC-compliant server and to many third-party device servers. You also can connect to custom I/O servers.

Additionally, you can use I/O servers to connect to the NI OPC Servers that the DSC Module provides. Use the NI OPC Servers application, available by selecting Start»All Programs»National Instruments»NI OPC Servers x»NI OPC Servers Configuration, where x is the NI OPC Servers application version, to transfer data from industrial devices and systems to client applications on a host computer. (Windows 8) Click NI Launcher and select NI OPC Servers x»NI OPC Servers Configuration, where x is the NI OPC Servers application version, in the window that appears. The NI OPC Servers application enables data sharing between a variety of applications, such as HMI software, manufacturing execution systems, and enterprise resource planning applications.

Note  By default, the NI OPC Servers application is installed when you install the DSC Module. You have a temporary license for a two-hour evaluation period. If you do not activate the NI OPC Servers application license, this application runs in evaluation mode for two hours. When the evaluation period expires, you must activate a valid license to continue using the NI OPC Servers application. Refer to the NI OPC Servers Help, available by selecting Help»Server Help from the NI OPC Servers application, for more information about activating and using the NI OPC Servers application.

The DSC Module also can function as an OPC server and as a data source for the NI Publish-Subscribe Protocol networking protocol. The SVE functions as an OPC 2.x and OPC 3.0 compatible server. LabVIEW uses the National Instruments Variable Engine OPC interface to display all numeric, Boolean, and string shared variables that you deploy to the SVE. Use any OPC 2.x or OPC 3.0 client to view and modify OPC data that the OPC server publishes.

When you use a third-party OPC client to connect to the National Instruments Variable Engine OPC server, the server name might appear as National Instruments Variable Engine and National Instruments Variable Engine.1. To ensure forward compatibility, connect to the National Instruments Variable Engine instance when configuring an OPC connection.

Installers you build using the Application Builder also function as OPC servers if you include the SVE in the installer.

A server is not always the same as a device driver or an instrument driver. An instrument driver is a software component designed to control a programmable instrument, such as a multimeter. A device driver is a low-level software component that a computer needs to work with a plug-in interface. A device driver also can function as a server if the device driver meets certain standards, such as the OPC specification.

To view related topics, click the Locate button, shown at left, in the toolbar at the top of this window. The LabVIEW Help highlights this topic in the Contents tab so you can navigate the related topics.

 

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
Add Comments 1 2 3 4 5 submit