Company Events Academic NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Using the VisualDSP++ Configurator (Blackfin, Embedded Module)

You must define and configure the Blackfin target platform, which VisualDSP++ uses to communicate with the Blackfin target, when you configure the Blackfin target. The Embedded Module for Blackfin Processors includes the correct configurations for the BF533 EZ-KIT, BF537 EZ-KIT, and BF538 EZ-KIT. You only need to use the VisualDSP++ Configurator if you need to define additional platforms for a custom design.

Use the VisualDSP++ Configurator to do the following:

  • Define the JTAG scan structure for the Blackfin target.
  • Specify a unique name for each processor in a multiprocessor system.
  • Create platforms based on different target setups.
  • Test the target using the ICE (In Circuit Emulator) Test utility.

Complete the following steps to launch the VisualDSP++ Configurator.

  1. Right-click a Blackfin target in the Project Explorer window and select Configure Target from the shortcut menu to open the VisualDSP++ Target Configuration dialog box.
  2. Click the Configure button to launch the VisualDSP++ Configurator.
  3. Click the Help button in the VisualDSP++ Configurator dialog box to open the VisualDSP++ Help for information about using the VisualDSP++ Configurator.

Resources
 

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
Add Comments 1 2 3 4 5 submit