June 2012, 371741H-01
Requires: Control Design and Simulation Module. This topic might not match its corresponding palette in LabVIEW depending on your operating system, licensed product(s), and target.
Use the Control Design and Simulation VIs and Functions to design, analyze, simulate, and deploy dynamic system models.
|Note The System Identification VIs enable you to create mathematical models of dynamic systems by using system identification methods.|
|Control Design VIs and Functions||Use the Control Design VIs and functions to construct, analyze, and deploy dynamic system models in LabVIEW.|
|Fuzzy Logic VIs||Use the Fuzzy Logic VIs to design and control fuzzy systems. You also can use the Fuzzy System Designer to design fuzzy systems interactively.|
|PID VIs||Use the PID VIs to implement PID control applications. The first three VIs on the PID palette are different versions of the PID VI. These VIs can be used interchangeably depending on the needs of the application. The other VIs on the PID palette can be used with one of the PID VIs for additional functionality.|
|Simulation VIs and Functions||Use the Simulation VIs and functions to create simulation applications in LabVIEW.|
|System Identification VIs||Use the System Identification VIs to create and estimate mathematical models of dynamic systems. You can use the VIs to estimate accurate models of systems based on observed input-output data.|
© 2004–2012 National Instruments. All rights reserved.