Supported Execution Targets (Digital Filter Design Toolkit)

»Table of Contents

LabVIEW 2009 Digital Filter Design Toolkit Help

Edition Date: June 2009

Part Number: 371988C-01

»View Product Info

You can use the LabVIEW Digital Filter Design Toolkit to execute a digital filter on many different types of targets. The following table shows the supported target types and any additional software you must install to execute a digital filter on that type of target.

Type of Target	Additional Required Software
A computer running Windows	—
A National Instruments field-programmable gate array (FPGA) target, such as an NI Reconfigurable I/O (NI-RIO) device. To use a digital filter on an FPGA target, you first must generate FPGA code for that filter.	LabVIEW FPGA Module NI-RIO driver software
A 32-bit microprocessor. To use a digital filter on a 32-bit microprocessor, you first must generate fixed-point C code for that filter.	LabVIEW with embedded target support The LabVIEW add-on for the embedded target
An NI Real-Time (RT) target, such as an NI PXI or CompactRIO controller, running the NI ETS or Wind River VxWorks real-time operating system (RTOS). The Digital Filter Design VIs support native execution on these operating systems.	LabVIEW Real-Time Module Driver software for any hardware devices

Note Refer to the National Instruments Web site for information about the National Instruments products this table mentions.