Company Events Academic Community Support Solutions Products & Services Contact NI MyNI

Supported Execution Targets (Digital Filter Design Toolkit)

LabVIEW 2013 Digital Filter Design Toolkit Help

Edition Date: June 2013

Part Number: 371988F-01

»View Product Info

You can use the LabVIEW Digital Filter Design Toolkit to execute a digital filter on many different types of targets. The following table shows the supported target types and any additional software you must install to execute a digital filter on that type of target.

Type of Target Additional Required Software
A computer running Windows
A National Instruments field-programmable gate array (FPGA) target, such as an NI Reconfigurable I/O (NI-RIO) device. To use a digital filter on an FPGA target, you first must generate FPGA code for that filter.
  • LabVIEW FPGA Module
  • NI-RIO driver software
A 32-bit microprocessor. To use a digital filter on a 32-bit microprocessor, you first must generate fixed-point C code for that filter.
  • LabVIEW with embedded target support
  • The LabVIEW add-on for the embedded target
An NI Real-Time (RT) target, such as an NI PXI or CompactRIO controller, running a real-time operating system (RTOS). The Digital Filter Design VIs support native execution on these operating systems.
  • LabVIEW Real-Time Module
  • Driver software for any hardware devices
Note  Refer to the National Instruments Web site for information about the National Instruments products this table mentions.

 

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
Add Comments 1 2 3 4 5 submit