Locating an NI-RFSA Device

NI RF Vector Signal Analyzers (NI-RFSA 18.1) Help

Edition Date: June 2018

Part Number: 372058U-01

View Product Info

Download Help (Windows Only)


NI-RFSA 18.1 Help
NI-RFSA 18.2.1 Help
NI-RFSA 19.1 Help

To locate your NI-RFSA device in MAX, complete the following steps:

  1. In the configuration tree, double-click Device and Interfaces to see a list of installed devices. Installed devices appear under the name of their associated chassis.
Note Note  If you are using your NI-RFSA device with the LabVIEW Real-Time Module, expand Remote Systems. Find your target IP address or name, expand it, and then expand Devices and Interfaces.
  1. Expand your chassis tree item. MAX lists all devices installed in the chassis. Your default device names may vary.
  2. Record the device identifier MAX assigns to the hardware. Use this identifier when programming your NI-RFSA device. For hardware systems, record the device identifier for the downconverter module.
Tip  Instead of using the default naming convention, you may find it convenient to rename your devices in MAX.

WAS THIS ARTICLE HELPFUL?

Not Helpful