|Download Help (Windows Only)|
Sends a UDP request to all DoIP-capable vehicles in the local subnet to identify themselves.
|Broadcast Address is the IP address to send the request to. It defaults to 255.255.255.255 (broadcast on the default Network Interface Controller), but can be overridden to specify a specific broadcast address, e.g. on a specific Network Interface Controller).|
|Diag reference in specifies the diagnostic session handle, obtained from Open Diagnostic on IP.vi and wired through subsequent diagnostic VIs. Normally, it is not necessary to manually manipulate the elements of this cluster.|
|error in is a cluster that describes error conditions occurring before the VI executes. If an error has already occurred, the VI returns the value of the error in cluster to error out.
|Diag reference out is a copy of Diag reference in. You can wire it to subsequent diagnostic VIs.|
|error out describes error conditions. If the error in cluster indicated an error, the error out cluster contains the same information. Otherwise, error out describes the error status of this VI.
DoIP Send Vehicle Identification Request.vi sends a Vehicle Identification Request to all DoIP entities in the local subnet.
Usually, this is done as part of DoIP Get Entities.vi and does not need to be executed separately.