You are here: NI Home > Support > Product Reference > Manuals > Sound and Vibration Measurement Suite 7.0 Help

Owning Palette: Weighting and Filtering VIs

Installed With: Sound and Vibration Measurement Suite

Applies the selected weighting to scaled signal [EU]. The data type you wire to the scaled signal [EU] input determines the polymorphic instance to use.

Use the pull-down menu to select an instance of this VI.

Select an instance SVT A, B, C Weighting Filter (Fixed Rates) (1 Waveform)SVT A, B, C Weighting Filter (Fixed Rates) (N Waveforms)

SVT A, B, C Weighting Filter (Fixed Rates) (1 Waveform)

	scaled signal [EU] specifies the scaled signal expressed in the selected engineering units. To obtain a properly scaled signal, you can use the SVL Scale Voltage to EU VI or define a virtual channel in National Instruments Measurement & Automation Explorer (MAX). t0 is the start time of the waveform. dt is the time interval in seconds between data points in the waveform. Y contains the data values of the waveform.
	weighting specifies the type of weighting to apply to the spectrum. The weighting is applied to the spectrum in the frequency domain. Use Linear if no weighting is needed. Linear (default) A-weighting B-weighting C-weighting
	error in describes error conditions that occur before this VI or function runs. The default is no error. If an error occurred before this VI or function runs, the VI or function passes the error in value to error out. This VI or function runs normally only if no error occurred before this VI or function runs. If an error occurs while this VI or function runs, it runs normally and sets its own error status in error out. Use the Simple Error Handler or General Error Handler VIs to display the description of the error code. Use exception control to treat what is normally an error as no error or to treat a warning as an error. Use error in and error out to check errors and to specify execution order by wiring error out from one node to error in of the next node. status is TRUE (X) if an error occurred before this VI or function ran or FALSE (checkmark) to indicate a warning or that no error occurred before this VI or function ran. The default is FALSE. code is the error or warning code. The default is 0. If status is TRUE, code is a nonzero error code. If status is FALSE, code is 0 or a warning code. source specifies the origin of the error or warning and is, in most cases, the name of the VI or function that produced the error or warning. The default is an empty string.
	reset filter specifies whether this VI resets the weighting filter. The default is FALSE. The first time you call this VI, the filter restarts automatically.
	weighted signal [EU] returns the weighted signal.
	error out contains error information. If error in indicates that an error occurred before this VI or function ran, error out contains the same error information. Otherwise, it describes the error status that this VI or function produces. Right-click the error out front panel indicator and select Explain Error from the shortcut menu for more information about the error. status is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred. code is the error or warning code. If status is TRUE, code is a nonzero error code. If status is FALSE, code is 0 or a warning code. source describes the origin of the error or warning and is, in most cases, the name of the VI or function that produced the error or warning.

SVT A, B, C Weighting Filter (Fixed Rates) (N Waveforms)

	scaled signals [EU] specifies the scaled signals expressed in the selected engineering units. To obtain a properly scaled signal, you can use the SVL Scale Voltage to EU VI or define virtual channels in National Instruments Measurement & Automation Explorer (MAX).
	weighting specifies the type of weighting to apply to the spectrum. The weighting is applied to the spectrum in the frequency domain. Use Linear if no weighting is needed. Linear (default) A-weighting B-weighting C-weighting
	error in describes error conditions that occur before this VI or function runs. The default is no error. If an error occurred before this VI or function runs, the VI or function passes the error in value to error out. This VI or function runs normally only if no error occurred before this VI or function runs. If an error occurs while this VI or function runs, it runs normally and sets its own error status in error out. Use the Simple Error Handler or General Error Handler VIs to display the description of the error code. Use exception control to treat what is normally an error as no error or to treat a warning as an error. Use error in and error out to check errors and to specify execution order by wiring error out from one node to error in of the next node. status is TRUE (X) if an error occurred before this VI or function ran or FALSE (checkmark) to indicate a warning or that no error occurred before this VI or function ran. The default is FALSE. code is the error or warning code. The default is 0. If status is TRUE, code is a nonzero error code. If status is FALSE, code is 0 or a warning code. source specifies the origin of the error or warning and is, in most cases, the name of the VI or function that produced the error or warning. The default is an empty string.
	reset filter specifies whether this VI resets the weighting filter. The default is FALSE. The first time you call this VI, the filter restarts automatically.
	weighted signals [EU] returns the weighted signals.
	error out contains error information. If error in indicates that an error occurred before this VI or function ran, error out contains the same error information. Otherwise, it describes the error status that this VI or function produces. Right-click the error out front panel indicator and select Explain Error from the shortcut menu for more information about the error. status is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred. code is the error or warning code. If status is TRUE, code is a nonzero error code. If status is FALSE, code is 0 or a warning code. source describes the origin of the error or warning and is, in most cases, the name of the VI or function that produced the error or warning.