You are here: NI Home > Support > Product Reference > Manuals > Sound and Vibration Measurement Suite 7.0 Help

Owning Palette: Distortion VIs

Installed With: Sound and Vibration Measurement Suite

Computes the AC and DC levels of a signal.

Use the pull-down menu to select an instance of this VI.

Select an instance SVL AC & DC Level (1 Ch)SVL AC & DC Level (N Ch)

SVL AC & DC Level (1 Ch)

	scaled signal [EU] specifies the scaled signal expressed in the selected engineering units. To obtain a properly scaled signal, you can use the SVL Scale Voltage to EU VI or define a virtual channel in National Instruments Measurement & Automation Explorer (MAX). t0 is the start time of the waveform. dt is the time interval in seconds between data points in the waveform. Y contains the data values of the waveform.
	window specifies the time-domain window to use. 0 None 1 Hanning 2 Hamming 3 Blackman-Harris 4 Exact Blackman 5 Blackman 6 Flat Top 7 4 Term B-Harris 8 7 Term B-Harris (default) 9 Low Sidelobe
	error in describes error conditions that occur before this VI or function runs. The default is no error. If an error occurred before this VI or function runs, the VI or function passes the error in value to error out. This VI or function runs normally only if no error occurred before this VI or function runs. If an error occurs while this VI or function runs, it runs normally and sets its own error status in error out. Use the Simple Error Handler or General Error Handler VIs to display the description of the error code. Use exception control to treat what is normally an error as no error or to treat a warning as an error. Use error in and error out to check errors and to specify execution order by wiring error out from one node to error in of the next node. status is TRUE (X) if an error occurred before this VI or function ran or FALSE (checkmark) to indicate a warning or that no error occurred before this VI or function ran. The default is FALSE. code is the error or warning code. The default is 0. If status is TRUE, code is a nonzero error code. If status is FALSE, code is 0 or a warning code. source specifies the origin of the error or warning and is, in most cases, the name of the VI or function that produced the error or warning. The default is an empty string.
	unit label returns the selected engineering units.
	Returns the AC signal portion of the signal.
	Returns the AC level of the signal.
	Returns the DC signal portion of the signal.
	Returns the DC level of the signal.
	error out contains error information. If error in indicates that an error occurred before this VI or function ran, error out contains the same error information. Otherwise, it describes the error status that this VI or function produces. Right-click the error out front panel indicator and select Explain Error from the shortcut menu for more information about the error. status is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred. code is the error or warning code. If status is TRUE, code is a nonzero error code. If status is FALSE, code is 0 or a warning code. source describes the origin of the error or warning and is, in most cases, the name of the VI or function that produced the error or warning.

SVL AC & DC Level (N Ch)

	scaled signals in [EU] specifies the scaled signals expressed in the selected engineering units. To obtain a properly scaled signal, you can use the SVL Scale Voltage to EU VI or define a virtual channel in National Instruments Measurement & Automation Explorer (MAX).
	window specifies the time-domain window to use. 0 None 1 Hanning 2 Hamming 3 Blackman-Harris 4 Exact Blackman 5 Blackman 6 Flat Top 7 4 Term B-Harris 8 7 Term B-Harris (default) 9 Low Sidelobe
	error in describes error conditions that occur before this VI or function runs. The default is no error. If an error occurred before this VI or function runs, the VI or function passes the error in value to error out. This VI or function runs normally only if no error occurred before this VI or function runs. If an error occurs while this VI or function runs, it runs normally and sets its own error status in error out. Use the Simple Error Handler or General Error Handler VIs to display the description of the error code. Use exception control to treat what is normally an error as no error or to treat a warning as an error. Use error in and error out to check errors and to specify execution order by wiring error out from one node to error in of the next node. status is TRUE (X) if an error occurred before this VI or function ran or FALSE (checkmark) to indicate a warning or that no error occurred before this VI or function ran. The default is FALSE. code is the error or warning code. The default is 0. If status is TRUE, code is a nonzero error code. If status is FALSE, code is 0 or a warning code. source specifies the origin of the error or warning and is, in most cases, the name of the VI or function that produced the error or warning. The default is an empty string.
	unit labels returns the selected engineering units. unit labels returns the unit labels of the DC gap plot. X unit returns the engineering units for the x-axis. DC gap unit returns the engineering unit for the y-axis DC gap.
	Returns the AC signal portion of each signal.
	Returns the AC level of each signal.
	Returns the DC signal portion of each signal.
	Returns the DC level of each signal.
	error out contains error information. If error in indicates that an error occurred before this VI or function ran, error out contains the same error information. Otherwise, it describes the error status that this VI or function produces. Right-click the error out front panel indicator and select Explain Error from the shortcut menu for more information about the error. status is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred. code is the error or warning code. If status is TRUE, code is a nonzero error code. If status is FALSE, code is 0 or a warning code. source describes the origin of the error or warning and is, in most cases, the name of the VI or function that produced the error or warning.