SVT Set Swept Sine Propagation Delays VI

Sound and Vibration Measurement Help


Edition Date: March 2018
Part Number: 372416L-01
View Product Info

DOWNLOAD (Windows Only)


LabVIEW 2018 Sound and Vibration Toolkit Help
LabVIEW 2019 Sound and Vibration Toolkit Help

Owning Palette: Configure Advanced Settings VIs

Requires: Sound and Vibration Toolkit

Sets the propagation time, expressed in number of samples, introduced by the data acquisition board used to perform the swept-sine measurement and the propagation time, expressed in milliseconds, introduced by the device under test (DUT).

Example

swept sine task in specifies the swept-sine parameters.
Note  Do not modify the swept sine task in values.
device propagation delay [samples] specifies the propagation delay, in number of samples, for the device used to perform the measurement. The default is 1 sample.
DUT propagation time [ms] specifies the propagation time for the device under test (DUT) in milliseconds. The default is 0 ms.
error in describes error conditions that occur before this node runs. This input provides standard error in functionality.
swept sine task out returns the swept-sine parameters.
error out contains error information. This output provides standard error out functionality.

Example

Refer to the Frequency Response with Swept Sine (DAQmx) VI in the labview\examples\Sound and Vibration\Swept Sine directory for an example of using the SVT Set Swept Sine Propagation Delays VI.

WAS THIS ARTICLE HELPFUL?

Not Helpful