The Touch Panel Module supports the following targets:
| Target | Processor | Use |
|---|
| NI TPC-2006 | ARM | Use with NI TPC-2006 hardware |
| NI TPC-2012 | x86 | Use with NI TPC-2012 hardware |
| NI TPC-2106/NI TPC-2106T | ARM | Use with NI TPC-2106 hardware or NI TPC-2106T hardware |
| NI TPC-2512 | x86 | Use with NI TPC-2512 hardware |
| Touch Panel Windows CE 4.2 Device | ARM | Use with third-party touch panel computers running Windows CE 4.2 |
| TOUCH PANEL WINDOWS CE 4.2 Device | ARM or x86 | Use with third-party touch panel computers running Windows CE 4.2 |
| Touch Panel Windows CE 5.0 Device | ARM or x86 | Use with third-party touch panel computers running Windows CE 5.0 |
| Windows XP Embedded Device | x86 | Use with third-party touch panel computers running Windows XP Embedded |
 | Note If you use the x86 TOUCH PANEL WINDOWS CE 4.2 Device Touch Panel target,
you must manually download and install the eMbedded Visual Tools and Pocket PC 2003 SDK. Refer
to the KnowledgeBase for information about how to download and install these tools. |
| Note If you use the Windows XP Embedded Device Touch Panel target, the device must include an .msi engine in order to install the LabVIEW Run-Time Engine. The LabVIEW Run-Time Engine is required to run Touch Panel applications. You also must install the NI TPC Service on the device to deploy, run, and debug Touch Panel applications. Install the NI TPC Service on the target from the NI_TP_Service\NITPCService.msi, which is located in the same directory as the LabVIEW installer setup.exe file. |
