Supported Touch Panel Targets (Touch Panel Module)

»Table of Contents

LabVIEW 2009 Touch Panel Module Help

Edition Date: June 2009

Part Number: 372507B-01

»View Product Info

The Touch Panel Module supports the following targets:

Target	Processor	Use
NI TPC-2006	ARM	Use with NI TPC-2006 hardware
NI TPC-2012	x86	Use with NI TPC-2012 hardware
NI TPC-2106/NI TPC-2106T	ARM	Use with NI TPC-2106 hardware or NI TPC-2106T hardware
NI TPC-2512	x86	Use with NI TPC-2512 hardware
NI TPC-2515	x86	Use with NI TPC-2515 hardware
Touch Panel Windows CE 4.2 Device	ARM or x86	Use with third-party touch panel computers running Windows CE 4.2
Touch Panel Windows CE 5.0 Device	ARM or x86	Use with third-party touch panel computers running Windows CE 5.0
Windows XP Embedded Device	x86	Use with third-party touch panel computers running Windows XP Embedded

Note If you use the x86 Touch Panel Windows CE 4.2 Device Touch Panel target, you must manually download and install the eMbedded Visual Tools and Pocket PC 2003 SDK. Refer to the KnowledgeBase for information about how to download and install these tools.

Note If you use the Windows XP Embedded Device Touch Panel target, the device must include an .msi engine in order to install the LabVIEW Run-Time Engine. The LabVIEW Run-Time Engine is required to run Touch Panel applications. You also must install the NI TPC Service on the device to deploy, run, and debug Touch Panel applications. Install the NI TPC Service on the target from the NI_TP_Service\NITPCService.msi, which is located in the same directory as the LabVIEW installer setup.exe file.