LabVIEW 2013 Touch Panel Module Help
Edition Date: June 2013
Part Number: 372507E-01
»View Product Info
The Touch Panel Module supports the following targets:
Target |
Processor |
Use |
NI TPC-2512 |
x86 |
Use with NI TPC-2512 hardware |
NI TPC-2515 |
x86 |
Use with NI TPC-2515 hardware |
NI TPC-2215 |
x86 |
Use with NI TPC-2215 hardware |
NI TPC-2212 |
x86 |
Use with NI TPC-2212 hardware |
NI TPC-2206 |
x86 |
Use with NI TPC-2206 hardware |
Windows Embedded Standard Device |
x86 |
Use with third-party touch panel computers running Windows Embedded Standard |
 |
Note Windows Embedded Standard is a componentized version of Windows, which allows you to customize the operating system image. National Instruments tests and certifies the Touch Panel Module to work with the Windows Embedded Standard OS image that ships with National Instruments touch panel computers. If you use third-party touch panel hardware with Windows Embedded Standard and you do not install the correct components, the LabVIEW application may not function properly. Please contact National Instruments technical support at ni.com/support if you experience unexpected behavior executing a LabVIEW touch panel application with a third-party Windows Embedded Standard touch panel computer. However, National Instruments does not officially support compatibility issues with third-party Windows Embedded Standard 7 touch panel computers. |
 |
Note If you use the Windows Embedded Standard Device Touch Panel target, the device must include an .msi engine in order to install the LabVIEW Run-Time Engine. The LabVIEW Run-Time Engine is required to run Touch Panel applications. You also must install the NI TPC Service on the device to deploy, run, and debug Touch Panel applications. Install the NI TPC Service on the target from the Distributions\Touch Panel\NI_TP_Service\NITPCService.msi file, which is located on LabVIEW Platform DVD 2. |