Company Events Academic Community Support Solutions Products & Services Contact NI MyNI

WSN Host API VIs

LabVIEW Wireless Sensor Network Module Help

Edition Date: June 2013

Part Number: 372802E-01

»View Product Info

Owning Palette: Wireless Sensor Network Module VIs

Requires: LabVIEW WSN Module. This topic might not match its corresponding palette in LabVIEW depending on your operating system, licensed product(s), and target.

Use the WSN Host API VIs to program, monitor, and control a wireless sensor network from a host computer.

Note  You can use the WSN Host API VIs on any RT target, such as the NI 9792 WSN Real-Time Gateway. You must use the NI Measurement & Automation Explorer (MAX) to install the Host API VIs on the RT target before you can run them on the target.
Palette ObjectDescription
WSN Cancel Firmware DeploymentCancels the uploading of the firmware to the WSN nodes in the network.
WSN Cancel MessageCancels sending a message to a WSN node.
WSN Close GatewayCloses the reference to the WSN gateway.
WSN Close MessageCloses the reference to a message sent to a WSN node.
WSN Close NodeCloses the reference to the specified WSN node.
WSN Deploy FirmwareDownloads the application to the WSN nodes.
WSN Discover All NodesReturns information about the WSN network from the WSN gateway.
WSN Gateway TimeReturns the current time from the WSN gateway.
WSN Get New MessagesReturns all new messages received by the WSN gateway from a WSN node since a specified starting time.
WSN Get Node InfoReturns information about the specified WSN node from the gateway.
WSN Message StatusReturns the status of a message sent to a WSN node.
WSN Open GatewayCreates a reference to the WSN gateway.
WSN Open Node ReferenceCreates a reference to the specified WSN node.
WSN Send MessageSends a user message to a WSN node.

 

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
Add Comments 1 2 3 4 5 submit