Company Events Academic Community Support Solutions Products & Services Contact NI MyNI

Bit Count to Bitstream Conversion VI

LabVIEW 2012 Jitter Analysis Toolkit Help

Edition Date: June 2012

Part Number: 373270B-01

»View Product Info
Download Help (Windows Only)

Owning Palette: Clock Recovery VIs

Requires: Jitter Analysis Toolkit

Converts information about the number of bits between transitions in a data signal to a sequence of bits that represents the data value at each unit interval.

data contains information about the data bit sequence between transitions in a waveform. You can use the Clock Recovery (Mean Clock) VI to generate this cluster.
bit count specifies the number of bits between successive transitions in the waveform.
slope identifies the direction of the first transition in the waveform.

-1Falling Edge—Specifies the transition is a falling edge, or one with a negative slope.
1Rising Edge (default)—Specifies the transition is a rising edge, or one with a positive slope.
error in describes error conditions that occur before this node runs. This input provides standard error in functionality.
bitstream is an array of zeros and ones that represent whether the signal is at its low or high state, respectively, during each unit interval.
error out contains error information. This output provides standard error out functionality.

 

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
Add Comments 1 2 3 4 5 submit