Packet:OFDM:Non-HT Modulation Mode Property

NI WLAN Analysis Toolkit 18.0 Help

Edition Date: October 2018

Part Number: 373724K-01

»View Product Info
Download Help (Windows Only)

Short Name: OFDM Non-HT Modulation Mode

Property of niWLANAnalysis

Specifies whether the format of the incoming OFDM signal is non-high throughput (HT). This property is valid only if you set the Standard property to 80211N MIMOOFDM, 80211AC MIMOOFDM, or 80211AF MIMOOFDM.

A non-HT format signal has only L-LTF, L-STF, and L-SIG symbols in the preamble, which are similar to 802.11n, 802.11ac, or 802.11af signals with the same bandwidth. The payload is modulated in the same manner as an 802.11a signal with a bandwidth of 20 MHz. The payload is repeated with appropriate tone rotation to fill the channel bandwidth.

The default value is OFF.

OFF (0)

Specifies that the input signal is not in non-HT format.

ON (1)

Specifies that the input signal is in non-HT format.

Remarks

The following table lists the characteristics of this property.

Datatype /images/reference/en-XX/help/373724K-01/ci32.gif
PermissionsRead/Write
High-level VIs N/A
ResettableNo

WAS THIS ARTICLE HELPFUL?

Not Helpful