DUT Power Down Step (TSM)

NI TestStand 2017 Semiconductor Module Help

Edition Date: July 2018

Part Number: 373892H-01

»View Product Info
Download Help (Windows Only)

Use this step type to power down a DUT using NI SMU(s) with the NI-DCPower driver or digital PPMU(s) with the NI-Digital Pattern Driver. You can provide an input value to the step to specify the settling time to delay after powering down the DUT.

Driver Requirements

  • NI-DCPower
  • NI-Digital Pattern

Parameters

The DUT Power Down step uses the following parameters:

LabVIEW Parameter Name .NET Parameter Name Units Purpose
Semiconductor Module Context semiconductorModuleContext Reference to the Semiconductor Module Context for the step. Always set this parameter to Step.SemiconductorModuleContext.
Pins and Pin Groups pinsAndPinGroups The set of pins and pin groups to use for the operation.
Settling Time (s) settlingTime Seconds Delay time to wait after the power down operation is complete.

See Also

TSM Step Templates

WAS THIS ARTICLE HELPFUL?

Not Helpful