June 2013, 373926A-01
Requires: myRIO Module. This topic might not match its corresponding palette in LabVIEW depending on your operating system, licensed product(s), and target.
Use the myRIO VIs to create applications on the NI myRIO.
|Analog Input||Reads values from one or more analog input channels on the NI myRIO.|
|Analog Output||Writes values to one or more analog output channels on the NI myRIO.|
|Digital Input||Reads values from one or more digital input channels on the NI myRIO.|
|Digital Output||Writes values to one or more digital output channels on the NI myRIO.|
|Encoder||Reads and decodes signals from an encoder. This Express VI reads the number of ticks that the encoder receives since the last counter reset.|
|I2C||Writes/reads data to/from an Inter-Integrated Circuit (I2C) slave device.|
|PWM||Generates a pulse width modulation (PWM) signal.|
|SPI||Writes/reads data to/from a serial peripheral interface (SPI) slave device.|
|UART||Writes/reads data to/from a Universal Asynchronous Receiver/Transmitter (UART) device.|
|Advanced I/O VIs||Use the Advanced I/O VIs to create applications for different I/O types on the NI myRIO.|
|Onboard Devices Express VIs||Use the Onboard Devices Express VIs to communicate with the accelerometer, user button, and LEDs on the NI myRIO.|
|Utilities VIs||Use the Utilities VIs to perform various tasks such as setting custom FPGA bitfiles and resetting I/O channels on the NI myRIO.|
© 2013 National Instruments. All rights reserved.