Bode Viewer

NI InsightCM™ 3.1 Help

Edition Date: July 2017

Part Number: 374498D-01

»View Product Info
Download Help (Windows Only)

Parent topic: Available Viewers

Supported Sensors: Sensors with both 1x Phase and 1x Magnitude or 2x Phase and 2x Magnitude features.

The Bode viewer contains two charts: the top displays the phase measurement, and the bottom displays the amplitude response.

What do you want to do?

Task Action
Modify the slow-roll runout value from sensor data so the plots start at 0. To compensate for slow-roll runout in magnitude and phase data, configure the 1x Magnitude Reference and 1x Phase Reference sensor property in the Properties tab of the Asset Configuration page. These are properties of the sensors that acquire data. You can also click the Slow-Roll Override button in the viewer toolbar to set the slow-roll override value.
Tip  If you notice that the configured reference values are incorrect or you want to temporarily use different values, you can override the properties with values that are calculated from sensor data.

Related link: Compensating for Slow-Roll Runout
Change the order of the magnitude. Click the Order button on the viewer toolbar and select either 1x Magnitude or 2x Magnitude.
Select the source sensor. If you have more than one feature selected in the asset tree, you can select the source sensor for the viewer by clicking the Choose Assets button on the viewer toolbar.

Related Information

Adding, Changing, and Removing Viewers

Properties Tab on Asset Configuration Page


Not Helpful