|Download Help (Windows Only)|
Parent topic: Available Viewers
Supported Sensors: Sensors with both 1x Phase and 1x Magnitude or 2x Phase and 2x Magnitude features.
You can use a polar plot to display data in polar coordinates, enabling you to see phase changes in the range of zero to 360 degrees. The polar plot zero degree point is always located at the angular position of a transducer. You can compare data from orthogonally-mounted displacement probe pairs with a polar plot.
|Change the angle direction between clockwise and counterclockwise.||On the Properties tab of the Asset Configuration page, set the Rotation Direction as either clockwise or counterclockwise.|
|Remove the slow-roll runout value from sensor data so the plots start at 0.||To compensate for slow-roll runout in magnitude and phase data, configure the 1x Magnitude Reference and 1x Phase Reference sensor properties on the Properties tab of the Asset Configuration page. These are properties of the sensors that acquire data.
Related link: Compensating for Slow-Roll Runout
|Change the order of the magnitude.||Click the Order button on the viewer toolbar and select either 1x Magnitude or 2x Magnitude.|
|Select the source sensor.||If you have more than one feature selected in the asset tree, you can select the source sensor for the viewer by clicking the Choose Assets button on the viewer toolbar.|