Company Events Academic Community Support Solutions Products & Services Contact NI MyNI

5. Selecting a DUT

Calibration Executive 4.0 Help

Edition Date: March 2017

Part Number: 374564H-01

»View Product Info
Download Help (Windows Only)

The DUT Selection dialog box is shown in the following figure.

Calibration Executive: DUT Selection dialog

Note Note  The Device Name field populates automatically based on the calibration procedure you have selected.
  1. In the DUT Selection dialog box, enter the following information:
    • Tracking Number
    • Serial Number
  2. Complete any additional fields required by the procedure. The required information may vary depending on which device you are calibrating.
  3. Click Finish to launch the calibration procedure.

Device Identifiers

After you launch the procedure, a dialog box appears in which you must enter a device identifier such as a device number, device name, or resource name. This dialog box varies depending on which device you are calibrating.

Note Note   In some device procedures, the device identifier is required in the DUT Selection dialog box, rather than in a separate dialog box.

This device identifier is assigned by Measurement & Automation Explorer (MAX) when you configure the hardware in MAX. To find this information, launch MAX, expand Devices and Interfaces, and locate the device in the list.

Previous

Previous Step
4. Entering Environmental Information and Selecting Options
Next Step
6. (Optional) Selecting Test Points

Next


 

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
Add Comments 1 2 3 4 5 submit