|RFmx Demod 19.1 Help|
|RFmx Demod 20.0 Help|
Short Name: Input Isolation Enabled
Property of RFmxInstr
Specifies whether input isolation is enabled.
Enabling this property isolates the input signal at the RF IN connector on the RF downconverter from the rest of the RF downconverter signal path. Disabling this property reintegrates the input signal into the RF downconverter signal path.
|Note If you enable input isolation for your device, the device impedance is changed from the characteristic 50-ohm impedance. A change in the device impedance may increase the VSWR value higher than the device specifications.|
For PXIe-5830/5831, input isolation is supported for all available ports for your hardware configuration.
Supported devices: PXIe-5644/5645/5646, PXIe-5663/5663E/5665/5668, PXIe-5820/5830/5831/5840/5841
The default value is Disabled.
Indicates that the property is disabled.
Indicates that the property is enabled.
The following table lists the characteristics of this property.