NI Single-Board RIO CLIP Generator Help

NI Single-Board RIO CLIP Generator Help

Edition Date: August 2015

Part Number: 375106C-01

»View Product Info
Download Help (Windows Only)

August 2015, 375106C-01

Use this help file with the NI Single-Board RIO (sbRIO) Component-Level IP (CLIP) Generator application, which you can use to generate a unique socketed CLIP that you can import into a LabVIEW project for the following targets:

  • NI sbRIO-9607
  • NI sbRIO-9627
  • NI sbRIO-9651 System on Module (SOM)

The sbRIO CLIP Generator completes the following tasks for you:

  • Generates processor peripherals
  • Configures the raw FPGA I/O pins
  • Generates a LabVIEW FPGA I/O Node interface for the socketed CLIP

You can launch the sbRIO CLIP Generator in the following ways:

  • From the LabVIEW Project Explorer window, right-click Chassis (<target>)»FPGA Target and select Launch sbRIO CLIP Generator.
  • (Windows 8.x) Click the NI Launcher tile on the Start screen and select CompactRIO»Single-Board RIO»sbRIO CLIP Generator.
  • (Windows 7 or earlier) Select Start»All Programs»National Instruments»CompactRIO»Single-Board RIO»sbRIO CLIP Generator.
   

Get started: Get started

Creating Component-Level IP for an NI sbRIO Target


For more information about this help file, refer to the following topics:

Related Documentation

Legal Information

NI Services

To comment on National Instruments documentation, refer to the National Instruments website.

© 2014–2015 National Instruments. All rights reserved.

WAS THIS ARTICLE HELPFUL?

Not Helpful