niBT HCI LE Transmitter Test VI

NI Bluetooth Toolkit Direct Test Mode 19.1 Help

Edition Date: October 2019

Part Number: 375699E-01

»View Product Info
Download Help (Windows Only)

Sends a command to the device under test (DUT) to start the transmitter test.

niBT HCI LE Transmitter Test

/images/reference/en-XX/help/375699E-01/cio.gif

VISA resource name specifies the resource name corresponding to the DUT.

/images/reference/en-XX/help/375699E-01/ci32.gif

channel number specifies the Bluetooth transmit channel number of the signal generated by the DUT. The default value is 0.

/images/reference/en-XX/help/375699E-01/ci32.gif

payload length specifies the length, in bytes, of payload data in each packet that the DUT transmits. The default value is 37.

/images/reference/en-XX/help/375699E-01/ci32.gif

LE pattern type specifies the type of payload to use for the LE packet. The default value is PRBS9. Payload type values of PRBS9, 11110000, and 10101010 must be supported by the DUT. The remaining payload type values are optional.

PRBS9 (0)

Specifies that the bit sequence is PRBS9.

11110000 (1)

Specifies that the bit sequence is 11110000.

10101010 (2)

Specifies that the bit sequence is 10101010.

PRBS15 (3)

Specifies that the bit sequence is PRBS15.

11111111 (4)

Specifies that the bit sequence is 11111111.

00000000 (5)

Specifies that the bit sequence is 00000000.

00001111 (6)

Specifies that the bit sequence is 00001111.

01010101 (7)

Specifies that the bit sequence is 01010101.

/images/reference/en-XX/help/375699E-01/cerrcodeclst.gif

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

/images/reference/en-XX/help/375699E-01/iio.gif

VISA resource name out returns the resource name to which a VISA session is opened and the resource class. The class name matches the VISA resource name parameter.

/images/reference/en-XX/help/375699E-01/ii32.gif

status returns the status of the transmitter test command. The DUT receives and executes the transmitter test command if the status parameter returns a 0x00 value. The transmitter test command fails if the status parameter returns a non-zero (0x01-0xFF) value.

/images/reference/en-XX/help/375699E-01/ierrcodeclst.gif

error out contains error information. This output provides standard error out functionality.

WAS THIS ARTICLE HELPFUL?

Not Helpful