|Download Help (Windows Only)|
This VI is required to connect to an FPGA from the host. It calls the transfer VI underneath to send over the bitstream, then initiates a normal FPGA open call. This VI opens a reference to an FPGA device on the ATCA-3671. It must be used in place of the standard Open FPGA Reference VI due to the unique nature of the ATCA-3671 hardware platform, which requires that the FPGA bitstream be transferred over the network to the embedded controller on the ATCA-3671 before reprogramming can occur.
|RIO device specifies the resource name of the ATCA-3671 FPGA module to be opened.|
|IP address specifies the IP address of the ATCA-3671 on the network.|
|bitfile path specifies the filename of the LabVIEW FPGA bitstream to be opened on the ATCA-3671 FPGA device.|
|error in describes error conditions that occur before this node runs. This input provides standard error in functionality. If error in indicates an error, the node doesn't execute.|
|FPGA reference out returns a reference to an FPGA VI.|
|error out contains error information. This output provides standard error out functionality.|