BWP Configuration

RFmx Waveform Creator 19.1 Help

Edition Date: October 2019

Part Number: 377064G-01

»View Product Info

Download Help (Windows Only)


RFmx Waveform Creator 19.1 Help
RFmx Waveform Creator 20.0 Help

This section contains the following configuration parameters.

Subcarrier Spacing: Specifies the supported values on the basis of the selected channel bandwidth.

In general, valid values are 15 kHz, 30 kHz, 60 kHz, and 120 kHz. Currently, only one subcarrier spacing for a single carrier bandwidth part per carrier is supported.

Cyclic Prefix Mode: Specifies the cyclic prefix duration and the number of symbols in a slot for the signal being measured. When Cyclic Prefix Mode is Normal, the number of symbols in a slot is 14. When Cyclic Prefix Mode is Extended, the number of symbols in a slot is 12.

Grid Start: Specifies the resource block offset of a grid relative to the Ref Pt. A.

RB Offset: Specifies the resource block offset of a bandwidth part relative to the resource grid start.

Number of RBs: Specifies the number of consecutive resource blocks in a bandwidth part. The valid range depends on frequency range, channel bandwidth, subcarrier spacing, and grid settings. To automatically configure all the available RBs, set this parameter to -1.

Number of User Configurations: Specifies the number of user configurations in a bandwidth part.

WAS THIS ARTICLE HELPFUL?

Not Helpful