|LabVIEW 2018 ELVIS III Toolkit SP2 Help|
|LabVIEW 2019 ELVIS III Toolkit Help|
Owning Palette: Instruments VIs
Requires: ELVIS III Toolkit. This topic might not match its corresponding palette in LabVIEW depending on your operating system, licensed product(s), and target.
Use the Logic Analyzer and Pattern Generator VIs to configure and control the Logic Analyzer and Pattern Generator (Logic) instrument.
|Logic Auto Setup||Automatically configures certain settings that are best suited to the input signal.|
|Logic Close||Stops the session and deallocates any resources acquired during the session.|
|Logic Initialize||Establishes communication with the device. Call this VI once per session.|
|Logic Read||Reads the digital signal and detects when and how the acquisition is triggered.|
|Logic Run||Transitions the acquisition from the Stopped state to the Running state. If the current state is Triggered, the acquisition is first transitioned to the Stopped state before transitioning to the Running state.|
|Configuration VIs||Use the Configuration VIs for advanced configuration and control of the Logic instrument.|
|Utility VIs||Use the Utility VIs as helper VIs to perform a variety of auxiliary operations, such as resetting the instrument or querying instrument configurations.|