Sawtooth Wave (Not in Base Package)

Generates an array containing a sawtooth wave. Details  Example

	reset phase determines the initial phase of sawtooth wave. The default is TRUE. If reset phase is TRUE, the initial phase is set to phase in. If reset phase is FALSE, the initial phase is set to the value of phase out when the VI last executed.
	samples is the number of samples of the sawtooth wave. The default is 128.
	amplitude is the amplitude of sawtooth wave. The default is 1.0.
	f is the frequency of sawtooth wave in normalized units of cycles/sample. The default is 1 cycle/128 samples, or 7.8125E-3 cycles/sample.
	phase in is the initial phase, in degrees, of sawtooth wave when reset phase is TRUE. phase in default is 0.
	sawtooth wave is the output sawtooth wave.
	phase out is the phase, in degrees, of the next sample of sawtooth wave.
	error returns any error or warning from the VI. You can wire error to the Error Cluster From Error Code VI to convert the error code or warning into an error cluster.

Sawtooth Wave Details

If the sequence Y represents sawtooth wave, the Sawtooth Wave VI generates the pattern according to the following equation.

y[i] = a*sawtooth(phase[i])

for i = 0, 1, 2, …, n – 1 and where a is amplitude and n is the number of samples.

sawtooth(phase[i]) is given by the following equation.

,

where

p = phase[i] modulo 360,

phase[i] = initial_phase + f*360*i,

f is the frequency in normalized units of cycles/sample,

initial_phase is phase in if reset phase is TRUE,

initial_phase is phase out from the previous execution of this instance of the VI if reset phase is FALSE.

The preceding equations can be represented by the following equation.

The Sawtooth Wave VI is reentrant, so you can use it to simulate a continuous acquisition from a sawtooth wave function generator. If the input control reset phase is FALSE, subsequent calls to a specific instance of the Sawtooth Wave VI produce the output sawtooth wave array containing the next samples of a sawtooth wave.

Because the Sawtooth Wave VI is a reentrant VI, when reset phase is set to FALSE, the Sawtooth Wave VI uses the phase out value as its new phase in the next time the VI executes.

Example

Refer to the Function Generator with FM VI in the labview\examples\analysis\sigxmpl.llb directory for an example of using the Sawtooth Wave VI.