NI Multisim Interactive Demonstration
The Multisim environment delivers a suite of powerful design, analysis, and validation tools to gain greater understanding of circuit behavior. In this interactive demonstration, explore how to quickly get started with Multisim by performing the basics of capture and simulation.
View Now (watch)
7 minute(s) demo
Reader Comments | Submit a commentSchematic symbol
I am using the Analog Devices evaluation program. I want to edit the schematic symbol of a 1p1s transformer by adding center taps on the primary and secondary. Where is the Symbol tab or Component Properties dialog box? Thank you.
firstname.lastname@example.org - Jan 25, 2013
Blinking Circuit Reply
Hello: in regards to the blinking circuit, the LEDs will flash if wired correctly. I believe your circuit needs a few adjustments. I suggest posting your circuit file on the Circuit Design forums; there are many helpful users and AEs that can help you with this: http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/bd-p/370
email@example.com - Nov 26, 2010
hello i would like to know if i make a blinking circuit on this software will the leds flash the way that they should. here are a couple of circuits that I have made but i can not get them to flash http://kevinshauger.wikispaces.com/Blink ing+Circuit please email on how i can get them to flash multi sim 11 or 7
firstname.lastname@example.org - Nov 19, 2010
Multisim é um execelente software a nível de graduação. Vida longa ao Multisim...
- Oct 13, 2010
Brilliant software! Much better value for money than Microcap.
- Apr 14, 2010
1) I entered a circuit and had trouble with the wiring rules (bidirectional and power etc.) 2) I made the circuit work with AD8065, but trying AD8067 crashed it (model sourced 800 mA from invert i/p). Returning to AD8065 was still OK. 3) Number of points per decade in noise analyser does not work intuitively. Needs some bug fixes, before it's worth buying!
email@example.com - May 8, 2009