Edit IVI Switch Step Dialog Box

TestStand 2019 Help

Edition Date: May 2019

Part Number: 370052AA-01

»View Product Info
Download Help (Windows Only)

IVI Switching Mode

The IVI Switch step type supports the following IVI switch operations:

  • Connect/Disconnect—Connects or disconnects the Source and Destination channels in the switch instrument.
  • Configure Scan—Configures the switch module for scanning.
  • Start Scan—Initiates a scanning operation.
  • Wait—Blocks operations until all switches debounce for an instrument.
  • Configure Switch—Configures channels as Configuration or Source channels and configures specific paths between channels.
  • Send Software Trigger—Sends a software trigger command to trigger the instrument during a scanning operation.
  • Abort Scan—Cancels a scanning operation.
  • Get Information—Retrieves low-level status and information from the instrument.

WAS THIS ARTICLE HELPFUL?

Not Helpful