Configuring ADC Calibration

NI Digital Multimeters Help (NI-DMM 18.1)

Edition Date: March 2018

Part Number: 370384V-01

»View Product Info
Download Help (Windows Only)

Configure ADC calibration by completing the following steps:

  • LabVIEW
    1. Insert niDMM Configure ADC Calibration into the block diagram.
    2. Set ADC Calibration to the desired input value (refer to the following table).
  • CVI/C++/Visual Basic
    1. Insert niDMM_ConfigureADCCalibration into the program.
    2. Set ADC Calibration to the desired input value (refer to the following table).


Values Description
AUTO (-1) The driver chooses the ADC calibration setting based on the configured function and resolution.
ON (1) Enables ADC Calibration.
OFF (0) Disables ADC Calibration.

Note Note  This feature is supported on the NI 4080/4081/4082 and the NI 4070/4071/4072.

WAS THIS ARTICLE HELPFUL?

Not Helpful