IviUpconverterBase Behavior Model

IVI Driver Help

Edition Date: August 2011

Part Number: 370430H-01

»View Product Info
Download Help (Windows Only)

The following state diagram shows the basic operation of the IviUpconverter.

The device is always operating, assuming power is applied, with an RF signal appearing at the output in response to an IF signal applied to the input. This specification defines a transient Settling state to account for the fact that the RF output signal may need to settle to a stable state after some operational parameters have been changed. Thus, in order to perform more accurate measurements, wait for a certain amount of time after changing some parameters to allow the signal to settle. A number of factors might require settling time, such as the following properties:

WAS THIS ARTICLE HELPFUL?

Not Helpful