|Download Help (Windows Only)|
Use the DAQmx Signal Routing VIs to route signals from one terminal to another.
|DAQmx Connect Terminals||
Creates a route between a source and destination terminal. The route can carry a variety of digital signals, such as triggers, clocks, and hardware events.
|DAQmx Disconnect Terminals||
Removes signal routes you created by using the DAQmx Connect Terminals VI. The DAQmx Disconnect Terminals VI cannot remove task-based routes, such as those you create through timing and triggering configuration.
|DAQmx Tristate Output Terminal||
Sets a terminal to high-impedance state. If you connect an external signal to a terminal on the I/O connector, the terminal must be in high-impedance state. Otherwise, the device could double-drive the terminal and damage the hardware. If you use this VI on a terminal in an active route, the VI fails and returns an error.