More >> Pause >> Analog Level >> Hysteresis

NI-DAQmx C Reference Help

Edition Date: January 2019

Part Number: 370471AM-01

»View Product Info
Download Help (Windows Only)
Data Type: float64
Description: Specifies a hysteresis level in the units of the measurement or generation. If Pause When is DAQmx_Val_AboveLvl, the trigger does not deassert until the source signal passes below Level minus the hysteresis. If Pause When is DAQmx_Val_BelowLvl, the trigger does not deassert until the source signal passes above Level plus the hysteresis. Hysteresis is always enabled. Set this property to a non-zero value to use hysteresis.


You can get/set/reset this property using:

  DAQmxGetAnlgLvlPauseTrigHyst

  DAQmxSetAnlgLvlPauseTrigHyst

  DAQmxResetAnlgLvlPauseTrigHyst

WAS THIS ARTICLE HELPFUL?

Not Helpful